How to clean a faucet aerator

Cleaning a faucet aerator is one of the most common basic tasks that need to be done now and then. The necessity of doing this becomes evident once some symptoms, such as weak water pressure or water coming out in odd directions appear, and many times this starts happening so slowly and progressively that we do not realize of the problem until the faucet aerator is very dirty.

In order to clean a faucet aerator you do not need to turn the water supply off, although it is recommendable that the drain in which you will work is closed, since you will have to handle small parts and otherwise you could loose them. You should unscrew the tip of the faucet carefully, making sure you don't loose any of its parts.

Once the aerator is removed, make sure you remember how the different small parts that came out with it were placed, or screwing them back might become difficult. Wash and clean all the pieces that came out since most of them might be dirty and have rust. If any of the parts becomes too difficult to be cleaned, you should soak them in white vinegar for about five minutes and then try to remove the dirt with a small brush or a toothbrush.

Also, a pin or a similar tool can be very useful for cleaning some of the parts of the faucet aerator. You might have to work with patience and paying attention to small details, but it shouldn't take very long and after the work is done it is rewarding to see how the water comes much more powerful and better directed than before.

After making sure everything is as clean as possible, you will be ready to order the parts as they were and screw the aerator back into its original place. Tighten it with your hand as good as possible and then check for any leaks. If you find water leaking from its sides, it will need to be screwed tighter. You can use pliers to unscrew or screw the faucet aerator if necessary.

Get home design and decorating ideas by watching homes from all over the world - please visit http://www.dwank.com

Home Building - Kitchen Sinks & Faucets

It wasn't long ago when homeowners had two choices when it came to selecting a new kitchen sink - cast iron or stainless steel. There were fewer choices of colors or shapes, and no options for customized sink accessories. Today, homeowners have a multitude of sink choices to help personalize their kitchen. With this new bounty of sink options, comes the challenge of picking out the right kitchen sink for your home. Here's a guide to help you make sense out of all the various materials and styles that are available to you:

Stainless steel is the most popular and usually the least expensive option. But don't go too cheap - look for sinks made from 18- to 20-gauge steel. A general rule of thumb is that the lower the gauge, the heavier and more durable the steel. The chrome and nickel content of the steel also affects quality. The ideal combination is 18% chrome and 8% nickel, because chrome adds strength and the nickel prevents corrosion.

The pros to using stainless steel are it complements commercial-style appliances, can be molded as a continuous part of a stainless steel countertop, won't chip and is easy to clean. The cons are it will show scratches, but over time it will develop a natural patina - if you can wait that long. Thinly gauged steels will dent and make noise, so to combat these cons, choose a model with a satin texture finish. They are available in both undermount and drop-in models. One word of caution though: If you want to undermount a stainless steel sink, the countertop must be a solid material and not a laminate (due to water exposure, laminates can eventually separate and bubble). Average cost of a stainless steel sink is between $350-$800.

Cast Iron Sinks feature an iron base coated with an enamel finish. While there are many colors to choose from, this type of sink is susceptible to chipping (exposing the black surface underneath, which is susceptible to rusting) and staining. When it comes to installation, cast iron is one of the most difficult because these sinks are heavy and bulky in nature. It also has limited undermount installation options. Expect to pay between $300 to $1500.

Composite sinks are available in three common forms - polyester/acrylic, quartz composite and granite-based. Of all the types of composite sinks available, polyester/acrylic are the lowest performing in terms of scratch and stain resistance, as they are made from soft materials that can cut and nick easily, but because of its shiny look and multitude of color choices - it remains an appealing choice for homeowners. And it's the cheapest composite sink on the market, ranging from $300 to $500. Quartz composite sinks provide a much more durable surface than polyester/acrylic because it's made of 70 percent quartz and 30 percent resin filler. These sinks can resist everyday cuts, scuffs and dents and can easily stand up to harsh cleaning materials or liquids that can stain other sinks. Granite-based sinks are the toughest sinks on the market. It won't scratch, rust, dent, burn or crack, but it will cost you some extra money. If you have your heart set on a glossy finish, than you'll want to explore other composite sinks, because granite-based sinks are only available in matte finish.

Solid Surface sinks are made from solid synthetic sheets which are formed by mixing a mineral compound with polyester and/or acrylic resins. The benefits to using a solid surface sink are that it can be molded from the same piece of solid surface that you use on your countertop, comes in a multitude of colors and designs and you can sand out the scratches. The average cost is around $300 to $700.

Types of Sinks

Self-rimming sinks are the least expensive and most common option. Its edges lap the countertop.

Undermounted and integral sinks are sinks where the edges are hidden. Undermounted sinks attach below the countertop. An integral sink is made out of the same material as the countertop and is fused to it, creating a seamless transition. Stainless steel, solid surface, and composite materials are flexible enough to mold integral sinks. The benefits of both these sinks is that they give a clean look and provide easy cleanup - no rims to push crumbs over.

Farmhouse sinks (also called apron sinks) feature an exposed front that sometimes juts past the front of the cabinetry that surrounds it. They are commonly used in kitchens with a rustic or country-style d?cor and the bowl itself is usually deeper than average. They often have no deck, so the faucet and other accessories are mounted directly into the countertop behind the bowl.

Note: By going with a flat bottomed sink and steep, straight side walls, you will greatly increase your usable sink space.

Sink Styles

The most common sink configurations are single bowl, double bowl, triple bowl and main sink plus a prep sink.

Single bowl sinks are great if you're tight on space or enjoy having some extra space when you're rinsing pots and pans.

Double-bowl sinks are usually configured where both bowls are the same size so you can use one side to wash your dishes and the other side to rinse them. You can also opt for one large bowl and a smaller bowl to use as a prep sink for cleaning fruits and vegetables.

Triple-bowl sinks give you the wash-and-rinse function plus a smaller prep sink, which usually has a garbage disposal built in.

Prep sinks are most commonly found on a separate kitchen island or by the stove, because it offers the added convenience of not having to drag your food from the main sink to your prep counter.

Sink Accessories

If you like to spend a lot of time in the kitchen you might want to check out some of these options - cutting boards that fit securely on the sink's sides and that have holes to empty scrapes through (works best when the sink has a garbage disposal attached), colanders that hang on the side, a garbage disposal, dish racks that fit into the basin and hot water dispensers. A note about garbage disposals - you want a high horsepower garbage disposal that can handle tough foods like meat scraps. If you're worried about noise using a larger horsepower, just be sure you have a wide dampening collar, because it greatly reduces the noise.

Faucets

In general your faucet will have its own style based on the shape of its handle or handles, its height and its accessories. Keep in mind that your faucet should be chosen to compliment the architectural theme you've created with your countertops, cabinetry and appliances. Faucets also offer a lot in the way of options - adjustable heights, spray and swivel features and multiple colors and finishes.

Don't forget about your sink when you choose your faucet, because if you have a self-rimming sink it comes with predrilled holes so you'll need to make sure your faucet will fit. You can pick any faucet you like if your sink is undermounted or integral, because the holes are drilled by the installer after you've picked out your faucet.

Here's a few things to consider to help choose a faucet that's right for you.

Handles Handles should be chosen to compliment your kitchen. The traditional style is a two-handled faucet with one knob for hot water and the other for cold water, which allows for independent control of both. However, faucets with one handle are becoming increasingly popular because you can enjoy the convenience of single-handedly controlling your water temperature and volume. Handles come in a thousand varieties, from cross-handles to wrist-blade lever styles.

Finish Look for a long-lasting, low maintenance finish to compliment your decor. Your choices are quite extensive and include chrome plating, nickel plating, white enamel, brass, colored epoxy, platinum, porcelain, bronze, stainless steel and gold or silver. The favored finishes are chrome and brass because they are easy to maintain and very durable. A word of caution if you go with brass - it requires a special protective coating to prevent it from tarnishing. For lots of color options and easy cleanup go with an epoxy finish.

Material When it comes to the faucet's main material, your two best options are solid brass or plastic. Solid brass comes highly recommended because it is a much tougher material than plastic and can handle extreme temperatures. Internally, your faucet will control the flow of water using either rubber washers, a plastic or ceramic cartridge, a plastic, brass, or stainless steel ball valve, or a ceramic disk. A ceramic disk is recommended for the same reasons as solid brass.

Spout and spray A basic kitchen faucet has a standard spout that rises only slightly in height from the faucet body to its tip. A high-arc faucet (also known as high-neck or gooseneck) has a spout that increases dramatically in height, often as high as ten inches or more. This allows for easy rinsing of large pots and presents an elegant look in any kitchen.

Note: If your design calls for a sink with two or three bowls, the length and flexibility of the spout is important. A long spout with a reach of 12- to 14-inches may be called for, as well as one that swivels at least 180 degrees to reach the different bowls. Spouts can be straight, short, elongated, curved, and high-rise, with an integrated spray that pulls out or pulls down.

It's hard to imagine a kitchen faucet that doesn't have some kind of retractable sprayer for washing vegetables and rinsing large pots, which is why almost all faucet manufacturers sell a system with a sprayer - a traditional side sprayer or a modern pullout spray.

Dripless Faucets Think longevity when you're installing anything that has to do with water. Consider how long a new faucet will last without dripping. Faucets should offer long-term performance and be drip-free for life - of course the operative word is should. To help minimize the chances of dripping it is best to use ceramic disc valving, because it's very durable and leak resistant.

Scald Protection This may not seem that important to you if you don't have children, but you may someday, so why not add an anti-scald feature to your faucet for a few more dollars.

Look for quality An inexpensive faucet may look as good as the more expensive one, but don't be fooled - it won't last long. Your flag should go up when plastic is used on integral parts, washers are controlling the flow of water (should have ceramic disks or replaceable cartridges) and are lightweight. Plummer bills will be far more costly down the road, than purchasing a high quality faucet from day one.

Get enough holes When you buy a new sink, you'll need to decide how many holes you will need in the "deck" - the flat part behind the bowls. Depending on the style of faucet you choose, you will need one to three holes to accommodate the taps and spigot. More holes will be needed for a hot-water dispenser, a spray accessory (if it's not part of the faucet) or a built-in soap dispenser. It's difficult, but not impossible, to add holes once the sink is in place, so get as many as you think you'll ever need.

Off-set drains By placing the drains to one side you'll gain more flat space for stacking dishes and glasses and create more usable space under the sink. Offset drains also allow water to drain, even if a large pan or tray is soaking in the sink.

Web or divider For double bowl sinks, make sure the web divider between the two bowls is lower than the outside sink walls. This will provide overflow protection by allowing water to flow from one bowl to the other.

Trends in Faucets and Sinks

Bigger is better, when it comes to kitchen sinks. The new trend in the kitchen is installing a large, single-bowl sink - which is more efficient for rinsing and washing, especially large pots and pans. The standard single bowl sink is 25 inches, but now people are looking for bowls that are 30 to 36 inches.

Rims are out! The majority of new homeowners are spending the extra money (about a couple hundred more) to get an undermounted or integral sink. It not only looks great, but it is very functional.

Pullout spray faucets and satin nickel or stainless steel finishes are very popular. Another trend is towards decorative faucets, which help add a little spice to your kitchen. If you want a sleeker style and finish then satin nickel or oil-rubbed bronze are worth checking out. Oil-rubbed bronze is a unique finish which gives a weathered, natural look that changes into a nice patina. For a more rustic/country look you can go for a farm or apron sink.

People like the idea of having a sink on the island where the cooktop is because they won't have to worry about dripping back and forth from the sink to the stove. For an added touch on your island you can get a small basin installed. It may look like just a pottery bowl, but it has real plumbing and is attached to the wall.

Pot-filler faucets are also becoming popular, because people don't want to have to keep running back to the sink to fill a pot. This faucet is attached right by the stove and folds back against the wall when you're not using it.

The House Designers award winning residential house plans, architectural home designs, floor plans, blueprints and home plans will make your dream home a reality!

Bathroom Faucets: Beauty, Functionality, and Versatility

The bathroom is often one of the smallest room in the house, but it ranks second behind kitchen for the number of design and architectural decisions that must be made. From a design standpoint, the bathroom has some of the greatest challenges. Take the case of the humble bathroom faucet. Today you can make a unique style statement in your bathroom by complimenting the bathroom with stylish bathroom fittings and embellishments. The bathroom faucets display an almost infinite variety of styles and finishes. The faucets can be purchased in a fabricated finish such as polished chrome, brass, nickel, gold, acrylic enamels of colors, stainless steel, copper and mix and match combinations. Your imagination is the limit.

There are a few things you should be considered when selecting the perfect bathroom faucet. First, consider the type of handle you prefer, the style you prefer, the finish you want, the requirement of the lavatory it will be installed in, and at last, consider how much you want to spend. The most incisive consideration in choosing a bathroom faucet is the requirements of not only the sink but the countertop on which it will be mounted as well. Not only is the number of holes critical, but also some sinks such as vessels cannot be drilled at all. It has to be mounted on a deck or through a wall. It is also important to remember that desired accessories such as hot water spout, sprayer, a soap dispenser or the like need additional holes. Of course, many popular pedestal sinks are an all in one sink and faucet.

The bathroom faucet can come in an abundance of varieties and the only limit to the design of the bathroom faucet is the manufacturer's imagination. The bathroom faucets are manufactured in basic three styles called centerset, widespread and mini-widespread with a number of variations within those styles. Thus, the decorative and functional faucets are often chosen to complement the architectural style of the bathroom. Bathroom faucets are available in literally thousands of various designs, patterns, and colors to please even the pickiest of potential faucet owners. Each of the manufacturers offer designs and models in several different styles. The only choice you need to make is which one fits your needs and which one would look best in your bathroom!

Phil has been working as a repairman for more than 7 years. He has plenty of experience in repairing homes, especially in bathrooms since that is where he started his career. He is focused on water conservation, since the bathroom is the number one place of water consumption in the home. Visit http://www.3falk.com to learn more about conserving water and shower faucets.

How To Fix That Leaky Bathtub Faucet - Fast!

Fixing a leaky bathtub faucet - or any other leaky faucet for that matter - can be an expensive job - UNLESS you can do it yourself!

In this article we want to look at the most common reason for a leaky faucet and show you how to fix it quickly and cheaply.

Preparation

It almost goes without saying that you should turn the water off first! Where to find the handle that does that? Just look under your sink and see where the pipes run. Somewhere along their length you will see either a handle or a wheel you can use to shut the mains supply off. In nearly every case you will need to turn it clockwise to shut.

One other preparation is to block the sink drain - just to prevent a nasty accident with something loose (like a screw or a small nut) disappearing down the drain never to be seen again. Use the plug you normally use, or put some cloth into the aperture. No good being wise after the event!

And - even though it goes without saying - make sure you have bought a replacement washer (or two) from the local hardware store - you don't want to be looking for that when you have the faucet in pieces do you!

Action

Locate the screw that is holding the handle of the faucet in place (it may be hidden behind a small plate or cover and that cover needs to be prised off using a small screwdriver or similar). Then undo the screw.

The next job is to get the handles off. Use a screwdriver to do this - you might need to use a little bit of force to prise it but it will come.

Now you will see the old washer (don't worry if not, we will put one in place anyway). Take off the old washer and replace with the new. Notice that the hole in the washer should just be a touch bigger than the central post that the handle turns.

Now retighten the handle, but only hand tight i.e. only until it stops turning without extra force needing to be applied.

Next, turn on the water again and see what happens! If there's no leak you're home and dry (excuse the pun!). If it still leaks, try tightening the handle a little more.

If it still leaks after that- then the problem is elsewhere and you'll need to get a plumber after all. But al least it was worth a try!

(And by the way - if you notice a big build up of lime around the handle - clean that off with a special removal product from your hardware store - it will pay you in the long run).

Things needed

A screwdriver or two - maybe one flathead and one Phillips or cross-screw. Also two washers (maybe take the old one off ahead of your visit to the store to be sure of getting the right one, or just buy a pack of mixed washers - not an expensive buy).

David Woodford is a freelance writer and owns info4u-services which helps people with free advice to help solve everyday problems. To find out more about fixing your faucet and other DIY jobs around your home, visit http:/http://www.fixleakyfaucet.com it will REALLY help you.