Dealing With The Leaking Bathtub Faucet

Drip, drip, drip. A leaky bathtub faucet is a common problem in many homes. If you have one, the good news is they are usually fairly simple to take care of.

The repair of leaky faucets is another often minor plumbing job that can be done by yourself with a minimum of effort and with no special tools. Although this may be true, it is an extremely important job. A single pinhole leak in a water pipe can waste up to 70 gallons of water per day. A badly leaking faucet can waste even more. This is a serious environmental issue today. There are some who claim that the very population levels of the world are depending on the supply of potable water. And we are already running behind.

There are two major types of faucets. The most common one in older homes is called the compression faucet. This faucet uses a rubber washer that is compressed when the valve is closed. The compressed washer expands and seals off the water flow. This process is hard on the washer and after a time they will wear out and need to be replaced.

When you go to replace the washer, you must first shut off the water supply to the faucet. Sometimes it is possible to do this at a more local spot close to the faucet, but other times it is necessary to shut off the main water supply to the home to isolate the faucet. It is a good idea to protect the enamel of the bathtub with towels to protect it from chips from dropped tools. Another good preparation idea is to cover drains to prevent small pieces from being dropped into them.

When you take apart the faucet to get to the washer, make diagrams or notes of exactly how you do so. This will make it easier to put it back together. Normally, the replacement of the washer will solve the leak problem. Keep spare washers handy in your tool box. You will need them again before long.

The newer type of faucet is called a washer less faucet. The name tells it all. The valve opens and shuts by an actual physical closing of the valve. You can usually tell if your faucet is compression or washer less just by feel. A compression faucet needs to be tightened to get it closed. The washer less faucet glides easily into place and does not need additional pressure to cut off the flow. There are fewer problems with leaking on washer less faucets. They tend to be either working or not. When they wear out, or do not operate properly, they should be replaced.

Fred Linson is with PlumbingStop.com - providing basic plumbing information and more resources.