Basics of Faucet Maintenance

A broken faucet is not a common occurrence, but when it does happen it is a messy one. If you own your own home you have to expect these incidents from time to time. The key is not to panic when there is water spraying around the room, but to concentrate on finding out where the problem is and get it fixed. The solution to most indoor plumbing problems is a lot simpler than you expect. It helps to have a basic knowledge of the general plumbing issues that you might encounter and how to fix them, or even better, prevent them from occurring in the first place with a little faucet maintenance.

Your kitchen gets at least as much use as your bathroom and kitchen faucets can spring a leak just as easily as those in the bathroom. Often the leak is not spotted as quickly as some faucets are hidden with a kitchen cabinet. Fixing the leak is fairly simple. Firstly you need to turn off the water valve that leads to the kitchen sink. Remove the leaky section of pipe and hold it up to the light to check for cracks or holes. You will need to replace the part of the pipe that is damaged. Wrap the open end of the pipe in plumbers tape or Teflon tape, with four or five rounds. Put the pipe back together and hook up the faucet. Turn the water back on to check that there are no more leaks in the pipe.

Waking up to find you have a frozen water pipe may be annoying, but you will probably find trying to track down the offending pipe even more frustrating. Try all the different water systems in your house to determine how many pipes are actually frozen. Turn off the ones that are working but leave the valve open on the ones that are not producing water. Next you need to turn off the main water valve to the house. You can now try to thaw the pipes.

Check what kind of pipes you have under your house. They could be made from plastic, or from a metal alloy. You will need a hairdryer or heat gun to thaw out the pipes, but be careful with plastic pipes as it is possible to melt them with too much heat. Before crawling under your house to thaw the pipes, make sure you have a long enough extension cord, the thawing device, and a flashlight. You may need to repair a hole or split in the pipe, and that may be the cause of the ice plug. In this case you will need spare pipe and plumbers tape as well. Assuming there is no hole you can heat the pipe by running the hairdryer or heat gun over it in a swishing motion, for no more than five minutes. Turn the water main back on and make sure there aren?t any leaks that you haven?t spotted.

Of course it would be better to prevent the pipes from freezing in the first place and this can be achieved by surrounding them in a heated pipe space, or installing insulation around them. Wrapping the pipes with heat tape, which can be purchased at your local hardware store, can also do the trick.

Jerry Blackburn very often pens news on ideas related to kitchen faucets and cabinets. You can have a look at his work on kitchen faucet maintenance over at http://www.kitchen-cabinets-tips.com/kitchen-faucets.html and many different sources for faucet maintenance tips.